GS1-128 (also known as UCC/EAN-128)

Bar Height: can be changed

Bar Width: can be changed

Bar Ratio: Fixed

Bearer Bar: No  (can be set)

Checksum / Check Digit : Some AI has a checksum / check digit

Control Characters: No

Digit Support: Yes

Digit Supplement Support: No

Letter Support: No

Light Margin Indicator: No

Min. Characters needed: Depends on the AI

Max. Characters: Depends on the AI

Other supported characters: No

Quiet Zone (Left & Right): can be changed

Special Characters: No

List Code: G128

Selected barcode type to make.

Input for the barcode.

Click on the Add to List button to add it to the Barcode List.

An input of 01950123456789033102000400 will show as (01)95012345678903(3102)000400 in the barcode, in the barcode is AI(00) and AI(310n). The n in the AI is the placement of the decimal separator. AI(3100) if you do not have a decimal separator or if you have 0004.00 then it's AI(3102), two decimals. In this case 4 kg.

For general distribution, the required minimum height of the bars is 32mm. For other scanning environments, a minimum height of 13mm is acceptable.

The total physical length of a UCC/EAN-128 (GS1-128) Bar Code Symbol depends on how many characters you encode and which

character set you use. The maximum physical length, including Quiet Zones (Light Margins), is 165mm.

GS1-128 Bar Code Symbol must not exceed 48 characters. This includes Function Code 1 (FNC1) when used as a field separator

Predefined AI in Barcode Image Maker Pro.

AI(00) Serial Shipping Container Code.

AI(01) Global Trade Item Number.

AI(02) GTIN of Trade Items Contained in a Logistic Unit.

AI(10) Batch or Lot Number.

AI(11) Production Date (YYMMDD).

AI(12) Date Due (YYMMDD).

AI(13) Packaging Date (YYMMDD).

AI(15) Best Before Date (YYMMDD).

AI(17) Expiration Date (YYMMDD).

AI(20) Product Variant.

AI(21) Serial Number.

AI(22) Secondary Data for Specific Health Industry Products.

AI(240) Additional Product Identification Assigned by the Manufacturer.

AI(241) Customer Part Number.

AI(242) Made-to-Order Variation.

AI(250) Secondary Serial Number.

AI(251) Reference to Source Entity.

AI(253) Global Document Type Identifier.

AI(30) Variable Count.

AI(310n) Net Weight - Kilograms.

AI(311n) Length of First Dimension - Meters.

AI(312n) Width, Diameter, or Second Dimension - Meters.

AI(313n) Depth, Thickness, Height, or Third Dimension - Meters.

AI(314n) Area - Square Meters.

AI(315n) Net Volume - Litres.

AI(316n) Net Volume - Cubic Meters.

AI(320n) Product Net Weight (Pounds). *

AI(321n) Product Length - First Dimension (Inches). *

AI(322n) Product Length - First Dimension (Feet). *

AI(323n) Product Length - First Dimension (Yards). *

AI(324n) Product Width - Diameter - Second Dimension (Inches). *

AI(325n) Product Width - Diameter - Second Dimension (Feet). *

AI(326n) Product Width - Diameter - Second Dimension (Yards). *

AI(327n) Product Depth - Thickness - Height - Third Dimension (Inches). *

AI(328n) Product Depth - Thickness - Height - Third Dimension (Feet). *

AI(329n) Product Depth - Thickness - Height - Third Dimension (Yards). *

AI(330n) Gross Weight - Kilograms.

AI(331n) Length or First Dimension - Meters.

AI(332n) Width, Diameter, or Second Dimension - Meters.

AI(333n) Depth, Thickness, Height or Third Dimension - Meters.

AI(334n) Area - Square Meters.

AI(335n) Gross Volume - Litres.

AI(336n) Gross Volume - Cubic Metres.

AI(337n) Kilograms Per Square Metre.

AI(340n) Container Gross Weight (Pounds). *

AI(341n) Container Length - First Dimension (Inches). *

AI(342n) Container Length - First Dimension (Feet). *

AI(343n) Container Length - First Dimension in (Yards). *

AI(344n) Container Width - Diameter - Second Dimension (Inches). *

AI(345n) Container Width - Diameter - Second Dimension (Feet). *

AI(346n) Container Width - Diameter - Second Dimension (Yards). *

AI(347n) Container Depth - Thickness - Height - Third Dimension (Inches). *

AI(348n) Container Depth - Thickness - Height - Third Dimension (Feet). *

AI(349n) Container Depth - Thickness - Height - Third Dimension (Yards). *

AI(350n) Product Area (Square Inches). *

AI(351n) Product Area (Square Feet). *

AI(352n) Product Area (Square Yards). *

AI(353n) Container Area (Square Inches). *

AI(354n) Container Area (Square Feet). *

AI(355n) Container Area (Square Yards). *

AI(356n) Net Weight (Troy Ounces). *

AI(357n) Net volume (or weight) (Ounces (U.S.)) *

AI(360n) Product Volume (Quarts). *

AI(361n) Product Volume (Gallons (U.S)). *

AI(362n) Container Gross Volume (Quarts). *

AI(363n) Container Gross Volume (Gallons (U.S.)). *

AI(364n) Product Volume (Cubic Inches). *

AI(365n) Product Volume (Cubic Feet). *

AI(366n) Product Volume (Cubic Yards). *

AI(367n) Container Gross Volume (Cubic Inches). *

AI(368n) Container Gross Volume (Cubic Feet). *

AI(369n) Container Gross Volume (Cubic Yards). *

AI(37) Count of Trade Items Contained in a Logistic Unit.

AI(390n) Amount Payable - Single Monetary Area.

AI(391n) Amount Payable - with ISO Currency Code.

AI(392n) Amount Payable for a Variable Measure Trade Item - Single Monetary.

AI(393n) Amount Payable for a Variable Measure Trade Item - With ISO Currency.

AI(400) Customer's Purchase Order Number.

AI(401) Consignment Number.

AI(402) Shipment Identification Number.

AI(403) Routing Code.

AI(410) Ship To - Deliver To GS1 Global Location Number.

AI(411) Bill To - Invoice to GS1 Global Location Number.

AI(412) Purchased From GS1 Global Location Number.

AI(413) Ship For - Deliver For - Forward To GS1 Global Location Number.

AI(414) Identification of a Physical Location GS1 Global Location Number.

AI(415) GS1 Global Location Number of the Invoicing Party.

AI(420) Ship To - Deliver To Postal Code Within a Single Postal Authority.

AI(421) Ship To - Deliver To Postal Code With Three - Digit ISO Country Code.

AI(422) Country of Origin of a Trade Item.

AI(423) Country of Initial Processing.

AI(424) Country of Processing.

AI(425) Country of Disassembly.

AI(426) Country Covering Full Process Chain.

AI(7001) NATO Stock Number.

AI(7002) UN/ECE Meat Carcasses and Cuts Classification.

AI(7003) Expiration Date and Time.

AI(7030) Approval Number of Processor with ISO Country Code.(Slaughterhouse)

AI(7031) Approval Number of 1st Processor with ISO Country Code. (First deboning/cutting hall)

AI(7032) Approval Number of 2nd Processor with ISO Country Code. (Cutting hall)

AI(7033) Approval Number of 3rd Processor with ISO Country Code. (Cutting hall)

AI(7034) Approval Number of 4th Processor with ISO Country Code. (Cutting hall)

AI(7035) Approval Number of 5th Processor with ISO Country Code. (Cutting hall)

AI(7036) Approval Number of 6th Processor with ISO Country Code. (Cutting hall)

AI(7037) Approval Number of 7th Processor with ISO Country Code. (Cutting hall)

AI(7038) Approval Number of 8th Processor with ISO Country Code. (Cutting hall)

AI(7039) Approval Number of 9th Processor with ISO Country Code. (Cutting hall)

AI(8001) Roll Products - Width, Length, Core Diameter, Direction, and Splices.

AI(8002) Electronic Serial Identifier for Cellular Mobile Telephones.

AI(8003) GS1 Global Returnable Asset Identifier.

AI(8004) GS1 Global Individual Asset Identifier.

AI(8005) Price Per Unit of Measure.

AI(8006) Identification of the Components of a Trade Item.

AI(8007) International Bank Account Number (IBAN).

AI(8008) Date and Time of Production.

AI(8018) GS1 Global Service Relation Number.

AI(8020) Payment Slip Reference.

AI(8100) GS1-128 Coupon extender Code - U.P.C Prefix + Offer Code.

AI(8101) GS1-128 Coupon Extender Code - U.P.C Prefix + Offer Code + End of.

AI(8102) GS1-128 Coupon Extended Code - U.P.C Prefix.

AI(90) Information Mutually Agreed Between Trading Partners (Including FACT DIs).

AI(91) Company Internal Information.

AI(92) Company Internal Information.

AI(93) Company Internal Information.

AI(94) Company Internal Information.

AI(95) Company Internal Information.

AI(96) Company Internal Information.

AI(97) Company Internal Information.

AI(98) Company Internal Information.

AI(99) Company Internal Information.

If you can't find the AI you are looking for you will be able to make the AI anyway, click here.

* GS1 encourages the use of the International System of Units (SI). The SI, commonly called the metric system, is now either obligatory or permissible throughout the world. However, in recognizing that not all trade is conducted using the SI metric system and many industries continue to use the inch/pound system (often referred to as United States of America customary units), GS1 make available Application Identifiers covering both the SI and inch/pound systems. If you need additional information about the NONE metric system, please contact GS1us www.gs1us.org

Included with Barcode Image Maker Pro. are different automatic settings for some barcodes, view sizes for different barcode types, Millimeters or Inches.

Also known as:

EAN-128, UCC-128, USS-128, GS1-128, UCC.EAN-128, GTIN-128