SCC-14

Bar Height: can be changed

Bar Width: can be changed

Bar Ratio: Fixed

Bearer Bar: Yes

Checksum / Check Digit : Yes (added automatically)

Control Characters: No

Digit Support: Yes

Digit Supplement Support: No

Letter Support: No

Light Margin Indicator: No

Min. Characters needed: 15 digits

Max. Characters: 16 digits

Other supported characters: No

Quiet Zone (Left & Right): can be changed

Special Characters: No

List Code: SC14

Selected barcode type to make.

Input for the barcode. Please note that the SCC-14 always starts with 01.

Click on the Add to List button to add it to the Barcode List.

The SCC-14 value to encode has the following structure:

--------------------------------------------------------------------------------------------

2 digits for GS1-128(UCC/EAN-128) Application Identifier (AI) which is always 01

1 digit for Packaging indicator

2 digits for UPC numbering system or EAN prefix

5 digits for Manufacturer identification number

5 digits for Item identification number

1 digit for Checksum, added automatically.

Must be 15 digits with the following structure: 01 + 13 digits. The checksum is

automatically added (that's the 16th digit).

Bearer Bar Horizontal included.

Please Note!!

If you have been using SCC-14 in Barcode Maker or Batch Barcode Maker you should use ITF-14 in Barcode Image Maker Pro. The SCC-14 used the Code 2 of 5 Interleaved barcode type for the encoding. This one uses the GS1-128 (UCC/EAN-128).

Included with Barcode Image Maker Pro. are different automatic settings for some barcodes, view sizes for different barcode types, Millimeters or Inches.

Also known as:

Shipping Container Code, EAN/UCC 14, DUN-14, EAN-14, UCC-14, UPC Case Code, UPC Shipping

Container Code, Distribution Unit Number 14, SCC14, DUN14, EAN14, UCC14, EAN/UCC-14, Despatch Unit

Number 14, GTIN-14